Products / Phenolic Moulding Compound
 
AMITY Grade
Mode of ** Moulding
Form *** Color # Filler $ Flow Prominent Characteristics
ATG - 112
Phenolic Moulding Compound / ATG - 112
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Good mouldability
   
  General characteristics » Medium mechanical strength
  » Medium electrical insulation
  » General purpose
   
Reference Data
Amity Grade A T G / 1 1 2
Mode of moulding Compression
Colour Black
Filler Organic
Flow Medium
Properties
Characteristics Unit Range
(min-max)
Apparent density g/cc 0.66 - 0.73
Density of moulding g/cc 1.40 - 1.50
Shrinkage of moulding % 0.75 - 0.86
Izod impact strength J/m of notch 28 - 37
Tensile strength ( 5mm / min. ) M Pa 40 - 50
Cross breaking strength M Pa 56 - 68
Dielectric strength at 900C M V/m 3.50 - 5.00
Surface resistivity log10ohm 9.50 - 10.50
Volume resistivity log10ohm-cm 10.50 - 11.50
Volume resistivity log10ohm-cm -
Revised on July-2008
C
 FG BK O S / M Good Mouldability
ATO - 144
Phenolic Moulding Compound / ATO - 144
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Broad spectrum application
   
  General characteristics » Good mouldability
  » Good mechanical strength
  » Good electrical insulation
  » Good surface finish
  » Medium thermal stability
   
Reference Data
Amity Grade A T O / 1 4 4
Mode of moulding Compression
Colour Black
Filler Organic
Flow Soft / Medium
Properties
Characteristics Unit Range
(min-max)
Apparent density g/cc 0.62 - 0.69
Density of moulding g/cc 1.38 - 1.45
Shrinkage of moulding % 0.70 - 0.83
Izod impact strength J/m of notch 28 - 42
Tensile strength ( 5mm / min. ) M Pa 46 - 60
Cross breaking strength ( 2mm / min. ) M Pa 66 - 76
Dielectric strength at 900C M V/m 5.50 - 7.00
Surface resistivity log10ohm 10.00 - 10.50
Volume resistivity log10ohm-cm 10.50 - 11.50
Revised on July-2008
C
 FG BK O S / M Broad Spectrum Application
ATO - 156
Phenolic Moulding Compound / ATO - 156
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Shock resistant – Heat resistant
   
  General characteristics » High electrical insulation
  » High mechanical strength
  » Dimensional stability
  » Low water absorption
   
 Reference Data
Amity Grade A T O / 1 5 6
Mode of moulding Compression
Colour Black
Filler Glass
Flow Medium
Properties
Characteristics Unit Range
(min-max)
Apparent density g/cc 0.75 - 0.85
Density of moulding g/cc 1.60 - 1.70
Shrinkage of moulding % 0.25 - 0.40
Izod impact strength J/m of notch 40 - 50
Tensile strength ( 5mm / min. ) M Pa 53 - 60
Cross breaking strength M Pa 75 - 80
Dielectric strength at 900C M V/m (min) 9
Surface resistivity log10ohm 11.0 - 12.0
Volume resistivity log10ohm-cm 11.5 - 12.5
Revised on July-2008
C
 CG BK G M Shock Resistant - Heat Resistant
ATO -142
Phenolic Moulding Compound / ATO - 142
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Electrical low loss - Good mechanical strength
   
  General characteristics » High electrical insulation
  » Good mechanical strength
» Glossy surface
» Low water absorption
 
Reference Data
Amity Grade   A T O/ 1 4 2
Mode of moulding   Compression
Colour   Black
Filler   Organic
Flow    Medium / Hard
Properties
Characteristics Unit Range
(min-max)
Apparent density g/cc 0.62 - 0.68
Density of moulding g/cc 1.35 - 1.40
Shrinkage of moulding % 0.75 - 0.83
Izod impact strength J/m of notch 25 - 40
Tensile strength ( 5mm / min. ) M Pa 50 - 60
Cross breaking strength M Pa 70 - 84
Dielectric strength at 900C M V/m 5.5 - 7.5
Surface resistivity log10ohm 10.0 - 11.0
Volume resistivity log10ohm-cm 10.5 - 11.5
Revised on July-2008
C
 FG BK O M / H Electrical Low Loss - Good Mechanical Strength
ATM - 122
Phenolic Moulding Compound / ATM - 122
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Broad Spectrum Application
   
  General characteristics » Good mouldability
  » Good mechanical strength
  » Good electrical insulation
  » Glossy Surface Finish
  » Medium thermal stability
   
 Reference Data
Amity Grade ATM / 122
Mode of moulding Compression
Colour Black
Filler Organic
Flow Soft / Medium
Properties
Characteristics Unit Range
Apparent density g/cc 0.62 - 0.68
Density of moulding g/cc 1.38 - 1.45
Shrinkage of moulding % 0.70 - 0.86
Izod impact strength J/m of notch 28 - 42
Tensile strength ( 5mm / min. ) M Pa 46 - 60
Cross breaking strength (2mm/min.) M Pa 64 - 74
Dielectric strength at 900C M V/m 5.00 - 7.00
Surface resistivity log10ohm 9.5 - 10.5
Volume resistivity log10ohm-cm 10.5 - 11.5
Revised on July-2008
C
 FG BK O S / M Broad Spectrum Application
ATS - 132
Phenolic Moulding Compound / ATS - 132
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Self lubricating ( graphite modified )
   
  General characteristics » Good glide properties
  » Good sealing properties
  » Medium or low mechanical strength
  » Unsuitable for electrical application
  » Glossy surface
  » Thermal conductivity
   
 Reference Data
Amity Grade A T S / 1 3 2
Mode of moulding Compression
Colour Grey
Filler Organic, inorganic, graphite
Flow Medium
Properties
Characteristics Unit Range
(min-max)
Apparent density g/cc 0.74 - 0.84
Density of moulding g/cc 1.55 - 1.68
Shrinkage of moulding % 0.24 - 0.36
Izod impact strength J/m of notch 17 - 27
Tensile strength ( 5mm / min. ) M Pa 28 - 35
Cross breaking strength M Pa 32 - 45
Dielectric strength at 90°C M V/m -
Surface resistivity log10ohm -
Volume resistivity log10ohm-cm -
Revised on July-2008
C
FG
GREY
O + GR
S
Self Lubricating ( Graphite Modified )
ATS - 157
Phenolic Moulding Compound / ATS - 157
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Shock resistant ( High impact strength )
   
  General characteristics » Very good mechanical strength
  » Good dielectric strength
  » Low water absorption
  » Low shrinkage
   
 Reference Data
Amity Grade A T S / 157
Mode of moulding Compression
Colour Pale brown
Filler Glass fibre
Flow Medium / Stiff
Properties
Characteristics Unit Range
Apparent density g/cc Fibrous Material
Density of moulding g/cc 1.70 - 190
Shrinkage of moulding % 0.15 - 0.26
Izod impact strength J/m of notch (min) 800
Tensile strength ( 5mm / min. ) M Pa (min) 80
Cross breaking strength ( 2mm/min. ) M Pa (min) 115
Dielectric strength at 900C M V/m (min) 8.00
Surface resistivity log10ohm (min) 11.5
Volume resistivity log10ohm-cm (min) 12.0
Revised on July-2008
C
 FG BK G M / Stiff Shock Resistant - ( High Impact Strength )
ATS - 751M
Phenolic Moulding Compound / ATS - 751M
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics High impact strength - dimensional stability
   
  General characteristics » High mechanical strength
  » Heat stability
  » Good media resistance (eg Oil, Water)
  » Low shrinkage
  » Good Electrical resistance
   
Reference Data
Amity Grade A T S / 7 5 1
Mode of moulding Compression
Colour Brown
Filler Inorganic & glass fibre
Flow Soft/ Medium
 Properties
Characteristics Unit Range
Apparent density g/cc 0.68 - 0.78
Density of moulding g/cc 1.63 - 1.75
Shrinkage of moulding % 0.20 - 0.30
Izod impact strength J/m of notch 45 - 65
Tensile strength ( 5mm / min. ) M Pa 60 - 70
Cross breaking strength M Pa 100 - 120
Dielectric strength at 900C M V/m 8.0 - 10.0
Surface resistivity log10ohm 11.0 - 11.5
Volume resistivity log10ohm-cm 11.5 - 12.0
Revised on July-2008
C
FG
BR
INO + G
S/M
High Impact Strength - Dimensional Stability
ATO -1510
Phenolic Moulding Compound / ATO -1510
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Shock resistant – Electrical low loss
   
  General characteristics » High mechanical strength
  » Heat stable
  » High electrical insulation
  » Dimensional stability
  » Good mechanical tension bearing strength
  » Medium copper adhesion
   
  Reference Data
Amity Grade A T O / 1 5 1 0
Mode of moulding Compression
Colour Black
Filler Glass fibre
Flow Medium
Properties  
Characteristics Unit Range
(min-max)
Apparent density g/cc 0.55 - 0.71
Density of moulding g/cc 1.70 - 1.82
Shrinkage of moulding % 0.20 - 0.30
Izod impact strength J/m of notch 50 - 65
Tensile strength ( 5mm / min. ) M Pa 55 - 70
Cross breaking strength M Pa 70 - 90
Dielectric strength at 900C M V/m 8.50 - 10.00
Surface resistivity log10ohm 11.00 - 11.50
Volume resistivity log10ohm-cm 11.50 - 12.00
Revised on July-2008
C
FG
BK
G
M
 Shock Resistant - Electrical Low Loss
ATI - 101
Phenolic Moulding Compound / ATI - 101
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Electrical Low Loss - Good mechanical strength
   
  General characteristics » High electrical insulation
  » Good mechanical strength
  » Glossy Surface
  » Low water absorption
   
 Reference Data
Amity Grade ATI / 101
Mode of moulding Injection
Colour Black
Filler Organic
Flow Very Soft
Properties
Characteristics Unit Range
Apparent density g/cc 0.60 - 0.68
Density of moulding g/cc 1.32 - 1.38
Shrinkage of moulding % 0.70 - 1.00
Izod impact strength J/m of notch 20 - 30
Tensile strength ( 5mm / min. ) M Pa 42 - 50
Cross breaking strength (2mm/min.) M Pa 67 - 70
Dielectric strength at 900C M V/m 5.00 - 7.00
Surface resistivity log10ohm 10.5 - 11.5
Volume resistivity log10ohm-cm 11.5 - 12.5
Revised on July-2008
I
FG
BK
O
VS
 Electrical Low Loss - Good Mechanical Strength
ATR - 457 ©
Phenolic Moulding Compound / ATR - 457 ©
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics High shock resistant ( high impact strength )
   
 General Characteristics High Mechanical Strength
 

High Dielectric Strength
  High Electrical Insulation.
   
   
Reference Data
Amity Grade A T R  / 4 5 7 (c)
Mode of moulding Compression
Colour Pale brown
Filler Glass fabric
Flow Medium
 Properties    
Characteristics Unit Range
(min-max)
Apparent density g/cc Glass Fabric
Density of moulding g/cc 1.85- 2.10
Shrinkage of moulding % 0.05 - 0.15
Izod impact strength J/m of notch 1500 - 2000
Tensile strength ( 5mm / min. ) M Pa 90 - 106
Cross breaking strength(2mm / min) M Pa 180 - 220
Dielectric strength at 900C M V/m (min) 8
Surface resistivity log10ohm (min) 11
Volume resistivity log10ohm-cm (min) 12
Revised on July-2008
C
FG
BK
G
M
High Shock Resistant - ( High Impact Strength )
ATR - 126
Phenolic Moulding Compound / ATR -126
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Ammonia free - Broad spectrum application
   
  General characteristics » Good mouldability
  » Good mechanical strength
  » Good electrical insulation
  » Good surface finish
  » Medium thermal stability
   
 Reference Data
Amity Grade A T R / 126
Mode of moulding Compression
Colour Black
Filler Organic
Flow Soft / Medium
Properties
Characteristics Unit Range
(min-max)
Apparent density g/cc 0.64 - 0.70
Density of moulding g/cc 1.37 - 1.42
Shrinkage of moulding % 0.60 - 0.77
Izod impact strength J/m of notch 22 - 30
Tensile strength ( 5mm / min. ) M Pa 46 - 55
Cross breaking strength ( 2mm / min. ) M Pa 66 - 75
Dielectric strength at 900C M V/m 4.00 - 7.00
Surface resistivity log10ohm 10.0 - 10.5
Volume resistivity log10ohm-cm 11.0 - 11.5
Revised on July-2008
C
 FG BK O S / M Ammonia Free - Broad Spectrum ApplicatioN
ATF - 197
Phenolic Moulding Compound / ATR -197
TECHNICAL DATA

  Material
Phenolic Moulding Compound
   
  Prominent characteristics Flame retardant - Spark resistant
   
  General characteristics » Good electrical insulation
  » Heat stability ( 200 0 C )
  » Good mouldability
  » Low water absorption
  » Low shrinkage
   
 Reference Data
Amity Grade ATF / 197
Mode of moulding Compression
Colour Black
Filler Inorganic & glass
Flow Soft/ Medium
Properties
Characteristics Unit Range
Apparent density g/cc 0.68 - 0.80
Density of moulding g/cc 1.45 - 1.60
Shrinkage of moulding % 0.45 - 0.55
Izod impact strength J/m of notch 22 - 30
Tensile strength ( 5mm / min. ) M Pa 39 - 46
Cross breaking strength (2mm/min.) M Pa 66 - 75
Dielectric strength at 900C M V/m 6.50 - 7.50
Surface resistivity log10ohm 10.5 - 11.5
Volume resistivity log10ohm-cm 11.5 - 12.0
Comparative tracking index V (min) 150
Revised on July-2008
C
 FG BK INO + G S / M Flame Retardant - Spark Resistant
 
* GP - General Purpose , MP - Multi Purpose , EA - Electrical Application , HR - Heat Resistant , SR - Shock Resistant
** C - Compression , T - Transfer , I - Injection
*** FG - Fine Granules , CG - Coarse Granules , F - Fibrous , T - Tuft / Flock
# BK - Black , BL - Blue , LBN - Light Brown , MBN - Medium Brown , RBN - Reddish Brown , DBN - Dark Brown ,
RD - Red , MRN - Maroon , GN - Green , NC - Natural , YL - Yellow.
$ O - Organic (wood powder ) , IN - Inorganic , G - Glass Fibre , MIN - Mineral , MIC - Mica , CL - Cellulose , CF - Cotton Fabric Flakes.
{ S - Soft , M - Medium , H - Hard , SF - Stiff / Short Folw , LF - Long Flow , VS - Very Soft.
 
Next 
 
 
Home | Company Profile | Our Products | Quality | Contact Us | Feedback
© Copy right 2011. Aims Plastics & Chemicals .All Rights Reserved. Developed by : Acme Infosoft